Tips on Buying Compressor Pipes and Lines
There are many components in the air compressor, as well as air compressor lines and fittings. The air system is usually the largest part of an air compressor. It requires more attention than most other parts of the air compressor and it is best to know what you are doing when handling these parts. When purchasing air compressor lines and fittings, you want to make sure you get the right ones for your needs.
How to Choose Tips on Buying Compressor Pipes and Lines
The capacity of your compressed air system is one of the first things you need to know. To figure out what the maximum CFM of your compressor is, you simply divide the measured CFM of the compressor with the cubic feet of compressed air to get the number of cubic feet per minute of airflow. Calculate your motor’s horsepower into this figure, so that you know the maximum pressure your compressor can push. To figure out your air compressor lines and fittings capacity, you need to multiply your air compressor’s CFM by 0.5 rounded to the nearest whole horsepower.
The next thing you need to determine is your line speed rating. Your system’s rated speed will determine the diameter of the pipes you purchase and the diameters of the compressor-line joints you must install. Air compressor lines and fittings manufacturers offer several different line speed ratings. You may need to partially compensate for your system’s rated speed by using a larger pipe for your line and fitting a smaller-diameter joint.